Accessories and Ancillary Equipment

Parts List

Janis Research has the following parts available for your existing Janis equipment.

When contacting Janis, please reference your system's serial number.  This is located on a black and silver Janis label.

 

Parts List

Epoxies

EP/ARALDITE Araldite general purpose epoxy, 7.2 oz kit
EP/VER-DER Versamid/DER cold window epoxy, six (6) 12.5 g packets
EP/12-MIN Fast set epoxy for threaded fittings, six (6) 6 g packets

Back to top

Greases

GR/APIEZON Apiezon N low vapor pressure vacuum and thermal anchoring grease (25 g)
GR/KRYTOX Krytox low vapor pressure thermal anchoring grease (2 oz tube)
GR/CELVAC Celvacene Light general purpose vacuum grease (4 oz jar)
GR/CRYCON CryCon copper-filled thermal grease (1 oz jar)

Back to top

Feedthroughs

EF/xxPIN ASSY 8, 10 or 19-pin electrical feedthrough with mating connector, flange mounted
EF/32PIN ASSY 32-pin electrical feedthrough with mating connector, flange mounted
EF/BNC(1)-S BNC electrical feedthrough (single), flange-mounted, solder connection
EF/BNC(1)-B BNC electrical feedthrough (single), flange-mounted, bulkhead
EF/BNC(2)-S BNC electrical feedthrough (double), flange-mounted, solder connection
EF/SMA(2)-S Double SMA feedthrough, flange-mounted, solder connection
EF/SMA(2)-B Double SMA feedthrough, flange-mounted, bulkhead
EF/TRIAX(1)-B Triax electrical feedthrough (single), flange mounted, jack-to-jack
  Breakout box for up to eight BNC, SMA or triax feedthrough PLUS
EF/BREAKOUT-BNC(X)-S ---- BNC solder connection (add per feedthrough, X)
EF/BREAKOUT-BNC(X)-B ---- BNC bulkhead (add per feedthrough, X)
EF/BREAKOUT-SMA(X)-S ---- SMA solder connection (add per feedthrough, X)
EF/BREAKOUT-SMA(X)-B ---- SMA bulkhead (add per feedthrough, X)
EF/BREAKOUT-TRIAX(X)-B ---- Triax bulkhead (add per feedthrough, X)
EF/THERMOCOUPLE Thermocouple feedthrough (including support clamp)
EF/FIBER Fiber feedthrough, swagelock style
EF/COMPR-SEAL 1/16" o-ring compression seal installed on feedthrough flange

Back to top

Ladish Equipment

LE/16AMP(1.5) Blank stainless steel flange (size 1.5)
LE/16AMP(2.0) Blank stainless steel flange (size 2.0)
LE/16AMP(2.5) Blank stainless steel flange (size 2.5)
LE/16AMP(3.0) Blank stainless steel flange (size 3.0)
LE/40MPU(1.5) Ladish gasket (size 1.5) (pack of 4)
LE/40MPU(2.0) Ladish gasket (size 2.0) (pack of 4)
LE/40MPU(2.5) Ladish gasket (size 2.5) (pack of 4)
LE/40MPU(3.0) Ladish gasket (size 3.0) (pack of 4)
LE/MHLA(1.5) Clamp (size 1.5)
LE/MHLA(2.0) Clamp (size 2.0)
LE/MHLA(2.5) Clamp (size 2.5)
LE/MHLA(3.0) Clamp (size 3.0)
LE/NW(XX)LA(X.X) NW flange to Ladish flange adaptor, specify NW size (XX) and ladish size (X.X)

Back to top

Indium Wire

IN/.040DIA 1 mm (0.040") diameter (3 meter minimum)

Back to top

Sample Holders

SH/STD-BLANK(x.x) Standard blank sample holder 0.88", 1.25" or 1.5" diameter, specify size (x.x)
SH/STD-OPTICAL(x.x) Standard optical sample holder 0.88", 1.25" or 1.5" diameter, specify size (x.x)
SH/STD-RESISTIVITY(x.x) Standard resistivity* sample holder 0.88", 1.25" or 1.5" diameter, specify size (x.x)
SH/SP-BLANK(x.x) Special-size blank sample holder up to 2" diameter, specify size (x.x)
SH/SP-OPTICAL(x.x) Special-size optical sample holder up to 2" diameter, specify size (x.x)
SH/SP-RESISTIVITY(x.x) Special-size resistivity* sample holder up to 2" diameter, specify size (x.x)
SH/DIP(XX) DIP package holder, any cryostat model, specify pin count (XX)
SH/LCC(XX) LCC holders, any cryostat model, specify pin count (XX)
SH/FIXED-500 Fixed-position probe holder to 500 K, includes four tungsten probes, wiring
SH/FIXED-80 Fixed-position probe holder to 800 K, includes four tungsten probes, wiring
SH/ADJCUV(XX) Adjustable cuvette holder, specify cuvette size (XX)
  * NOTE: resistivity sample holders limited to 500 K

Back to top

Special Sample Holders

SH/ADJCUV(XX) Adjustable cuvette holder for SVT or STVP cryostats, specify cuvette size (XX) in mm
SH/RAM45(XX) 45° Raman holder, specify size (XX) in mm

Back to top

Heater Kit

HK/325 Replacement heater kit for wound wire Janis heaters to 325 K
HK/500 Replacement heater kit for wound wire Janis heaters to 500 K

Back to top

Wire

WI/32PHTW 32 AWG Ph-Br twisted pair, 25 ft roll
WI/32PHQD 32 AWG Ph-Br quad ribbon, 25 ft roll
WI/30CU 30 AWG stranded copper, teflon insulated, 25 ft roll
WI/CX-SS Miniature coaxial wire, S/S, 38 AWG conductor, 25 ft roll
WI/CX-CU Miniature coaxial wire, copper, 30 AWG conductor, 25 ft roll
WI/TX-CU Miniature triaxial wire, 30 AWG copper conductor, 25 ft roll

Back to top

Cryostat Installed Wiring

WR/Ph-2PR Ph-Br wire, 32 AWG, (2) twisted pair
WR/MINI-CONNECTORS Add mini-connectors to (2) twisted pairs
WR/CX Miniature coax cable, soldered at feedthrough, loose in sample area
WR/CX-SMA Miniature coax cable with SMA male at each end
WR/TRIAX Miniature triax cable with triax male at feedthrough, loose in sample area
WR/SR Semi-rigid coax cable with SMA male at each end

Back to top

Product Selection Guides

Other news at Janis

Janis

How can we help you?

Superconducting MagnetsMore>

Complete product list: