Accessories and Ancillary Equipment
Parts List
Janis has the following parts available for your existing Janis equipment. When contacting Janis please reference your system's serial number. This is located on a black and silver Janis label. |
| PART NUMBER | DESCRIPTION | |
|---|---|---|
| Epoxies | Back to Top | |
| EP/ARALDITE | Araldite general purpose epoxy, 7.2 oz kit | |
| EP/VER-DER | Versamid/DER cold window epoxy, six (6) 12.5 g packets | |
| EP/STYCAST | Stycast 2850FT thermal anchoring epoxy, six (6) 10 g packets | |
| EP/STYCAST-HT | Stycast 2762 high temperature (500 K) epoxy, six (6) 10 g packets | |
| EP/12-MIN | Fast set epoxy for threaded fittings, six (6) 6 g packets | |
| Greases | Back to Top | |
| GR/APIEZON | Apiezon N low vapor pressure vacuum and thermal anchoring grease (25 g) | |
| GR/KRYTOX | Krytox low vapor pressure thermal anchoring grease (2 oz tube) | |
| GR/CRYCON | CryCon copper-filled thermal grease (1 oz jar) Click here for specifications for CryCon grease. | |
| Electrical Feedthroughs and Connectors | Back to Top | |
| EF/PIN(08) | Unmounted hermetic feedthrough (8 pin) | |
| EF/PIN(10) | Unmounted hermetic feedthrough (10 pin) | |
| EF/PIN(19) | Unmounted hermetic feedthrough (19 pin) | |
| EC/PIN(08) | Hermetic feedthrough mating connector (8 pin) | |
| EC/PIN(10) | Hermetic feedthrough mating connector (10 pin) | |
| EC/PIN(19) | Hermetic feedthrough mating connector (19 pin) | |
| Ladish Equipment | Back to Top | |
| LE/16AMP(1.5) | Blank stainless steel flange (size 1.5) | |
| LE/16AMP(2.0) | Blank stainless steel flange (size 2.0) | |
| LE/16AMP(2.5) | Blank stainless steel flange (size 2.5) | |
| LE/16AMP(3.0) | Blank stainless steel flange (size 3.0) | |
| LE/40MPU(1.5) | Ladish gasket (size 1.5) (pack of 4) | |
| LE/40MPU(2.0) | Ladish gasket (size 2.0) (pack of 4) | |
| LE/40MPU(2.5) | Ladish gasket (size 2.5) (pack of 4) | |
| LE/40MPU(3.0) | Ladish gasket (size 3.0) (pack of 4) | |
| LE/MHLA(1.5) | Clamp (size 1.5) | |
| LE/MHLA(2.0) | Clamp (size 2.0) | |
| LE/MHLA(2.5) | Clamp (size 2.5) | |
| LE/MHLA(3.0) | Clamp (size 3.0) | |
| LE/NW(XX)LA(X.X) | NW flange to Ladish flange adaptor, specify NW size (XX) and ladish size (X.X) | |
| Indium Wire | Back to Top | |
| IN/.040DIA | 1 mm (0.040") diameter (3 meter minimum) | |
| Special Sample Holders | Back to Top | |
| SH/ADJCUV(XX) | Adjustable cuvette holder for SVT or STVP cryostats, specify cuvette size (XX) in mm | |
| SH/RAM45(XX) | 45° Raman holder, specify size (XX) in mm | |
| Heater Kit | Back to Top | |
| HK/325 | Replacement heater kit for wound wire Janis heaters to 325 K | |
| HK/500 | Replacement heater kit for wound wire Janis heaters to 500 K | |
| Wire | Back to Top | |
| WI/32PHTW | 32 AWG Ph-Br twisted pair, 25 ft roll | |
| WI/32PHQD | 32 AWG Ph-Br quad ribbon, 25 ft roll | |
| WI/30CU | 30 AWG stranded copper, teflon insulated, 25 ft roll | |
| WI/CX-SS | Miniature coaxial wire, S/S, 38 AWG conductor, 25 ft roll | |
| WI/CX-CU | Miniature coaxial wire, copper, 30 AWG conductor, 25 ft roll | |
| WI/TX-CU | Miniature triaxial wire, 30 AWG copper conductor, 25 ft roll | |
| Cryostat Installed Wiring | Back to Top | |
| WR/Ph-2PR | Ph-Br wire, 32 AWG, (2) twisted pairs | |
| WR/CX | Miniature coax cable, soldered at feedthrough, stripped/tinned at sample end | |
| WR/CX-SMA | Miniature coax cable, soldered at feedthrough, stripped/tinned at sample end with SMA male each end | |
|
JANIS RESEARCH COMPANY, INC. 2 Jewel Drive, P.O. Box 696 Wilmington, MA 01887-0696 USA TEL: +1-978-657-8750 FAX: +1-978-658-0349 E-Mail: sales@janis.com Policies |
